Welcome to visit our MIC website and look over our products. We have 15 years experience in the field of X-ray baggage scanner, multi-zone walk through metal detector, hand held metal detector, under vehicle scanning system and Anti-explosive products
MD150 High Sensitivity EAS Handheld Gold Metal Detector
Power Voltage:9V Standard or Rechargeable Battery
Operating Voltage:7V -9V
Operating Temperature:-5 ºC to +55 ºC
1. With rechargeable battery and charger, earphone and Signal light
2. a Leathery cover outfits to the metal detector which makes metal detector be convenient to take.
3. There is a on-off which can switch the metal detector from sound alarm to light alarm, or from light alarm to sound alarm. It fits to work in different environments.
4. It needs 4-6 hours for charging. (the charger and rechargeable battery are ordered additional)
5. The alarm terms is sound and light alarm simultaneously, or vibration and light alarm simultaneously. You can choose the operate terms optionally.
6. When the low sensitivity on-off is pressed, the metal detector will only alarm when it finds big metal object (before you finish the low sensitivity detecting, don't loose the on-off).
7. Auto off (power saving)
9V Standard or Rechargeable Battery
-5 ºC to +55 ºC
It is a high performance Hand Held Metal Detector
Designed to meet the exact requirements of the security industry.
Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.
1. It operates on one 9V standard or rechargeable battery. To install the battery, slide off the battery cover and place the battery into its compartment while matching the +/- symbols.
2.Turn the unit on by pushing the on/off switch until it clicks on and the greed LED is lit. The detector is now operational although an increase in sensitivity and depth range can be achieved by turning the sensitivity adjuster anti-clockwise until the red LED is lit and a constant audio tune is heard. Turn the sensitivity adjuster clockwise until the red LED just goes out and the tone fades (green LED on).
The detector is now tuned for optimum sensitivity and depth range.
3.Holding the unit with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30mm above the area to be scanned.
4.The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is held still over a metal object the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when in use.
The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.
Typical performance figures are given below:
Maximum Detection Range
38 Caliber hand gun
LOW SENSITIVITY OPERATION
Press the low sensitivity switch during detection, scanner will then only respond to bigger metal objects such as a hand gun, knife, etc and will not respond to small metals such as a coin, key, hatpin, etc. Do not release the low sensitivity switch until you complete low sensitivity detection.
RECHARGEABLE BATTERY SOCKET
1.You may use a 9V rechargeable battery to power the detector.
2.It takes four to six hours to fully charge the battery. The battery charger socket is located at the side of the detector .
Note: Turn off the detector when charging it.
Can connect earphone to use in the noisy environment
SIGNAL LED LIGHT
The more LED shine means the metal bigger
The detector is equipped with a vibrator button also located at the side of the detector. Vibration function should be used in noisy work situations or in places where the operator does not wish for the audio tune to be heard in his surrounding area. Press this button, vibrator works; release it, audio tune works.
1.If the green light goes out completely or fails to come on or if the unit is making unfamiliar audio tunes, the unit is unstable and should not be used until the battery is recharged or replaced.
2.If the unit is not to be used for a certain length of time it is advisable to remove the battery to avoid battery leakage with could cause serious damage to the detector
3.When not in use, the detector should be stored in a dry warm environment.
Security detecting: Prevent taking contraband, such as: knife, gun and so on.
Factory: Prevent the loss of valued objects
Education area: Prevent taking cheat-tool, such as: telephone, electronic dictionary, and so on.
Our Company (Shenzhen Xinyuantong Electronics Co., Ltd., hereinafter "Company") was established in 2000 with the registered capital of RMB 31.5 million, the total business space is 12,000 m2, there are more than 260 employees, including 120 research, engineering and technical personnel; we are one professional high-tech company which provides the solutions to the public safety, and provides the complete production and integration services.
The Company is committed to the technical development and research of "Guard Spirit" series of security products, the developed products have been granted by 28 national patents, and have formed five categories of products including the metal detectors, X-ray access security products, test products for radioactive materials, chassis inspection products, EOD and anti-explosion products.
Our Company has been committed in the business of access security, security equipments and services for 12 years, and during the period, we have provided safety and security services for hundreds of large-scale events, meetings, exhibitions, political and legal departments, railways, highways, ports and other places, including 26th Summer Universiade Shenzhen 2011, World Expo 2010 Shanghai, 16th Asian Games Guangzhou 2010, 14th FINA World Championship -Shanghai 2011, 24th Winter Universiade Harbin 2009, Olympic Games Beijing 2008, Wuhan-Guangzhou high-speed railway, Beijing-Shanghai high-speed railway and other key events and projects.